Description Tuning Fork Density Meter
Tuning fork density meter is the introduction of foreign advanced frequency tracking technology and the production of high-precision, high applicability vibration principle density meter, product design using plug-in installation, widely used in pipelines, open tank containers and closed tank containers In the medium density testing.
Tuning fork density meter sensor is composed of two piezoelectric crystals, one piezoelectric vibration, the other piezoelectric crystal vibration detection, tuning fork sensor built-in temperature sensor, the piezoelectric crystal vibration temperature compensation.
Detailed Images Tuning Fork Density Meter
Specification Tuning Fork Density Meter
| Density range : | 0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1) |
| Output: | 4-20 mA 4-wire ( 2-wire system can not be used) |
| Accuracy: | 0.001 g / cc, with a resolution of 0.0001 g / cc |
| Insertion depth : | (flange distance to the end of the fork, minimum 125 mm, up to 2 meters) |
| Wetted material: | stainless steel, Hastelloy C22, 400 manganese alloys, titanium, etc. |
| Fork Coating: | standard, PTFE or electrolytic polishing |
| Power supply: | 20 - 28 VDC, 35 - 45mA |
| Operating temperature range: | -50 ℃ ~ + 200 ℃ |
| Maximum working pressure: | 20Mpa |
| Fluid viscosity range: | 0 - 20000 cP |
| Temperature coefficient: | 0.1 kg / m3 / ℃ (corrected) |
| Process connection: | 1.5 "NPT threaded connection; DIN 50 PN40 and PN100 flange connection; |
| Protection: | IP65 |
| Display: | Up density value, the density value can be switched to kg / cubic meter or g / cc by unit keys. Down display a temperature value (measured medium temperature ) temperature is original PT1000 |
| Accessory: | temperature of 4-20mA output signal |
The internal circuit board with automatic filtering function, other vibrations like pipe vibrations can eliminate away from the side of circuit and software,which ensure accuracy.
Feature Tuning Fork Density Meter
1.Adopting Germany piezoelectric ceramic piece, crossing gold process for ceramic piece to increase the inoxidizability of ceramic piece, thus increasing the service life of densitometer.
2.Fork vibration original piece adopts Japan's high performance original piece, in which installed 24 AD converter, and the accurate recognition for frequency is 0.01HZ, to ensure the sensitivity and accuracy of density.
3.Fork density calibration adopts national density standard solution, to ensure the source and accurate of density.
4.The current circuit is independent of fork vibration circuit, there is isolating anti-interference inner, reducing the influence to instrument from disturb.
5.There is set density three point quick calibration, range adjust, current calibration etc function, to meet on-site working demands.
6.Using high precision measuring density, is mainly used in power plant.
7.Can not be affected by temperature, pressure and flow rate , the factor affecting measuring error Is less.
Applications Tuning Fork Density Meter
1.Measurement of the density (concentration) of ore pulp in the process of ore dressing density (concentration) during coal feeding process;
2.Measurement of syrup density (concentration)
3.Measurement of starch emulsion density (concentration) (dry matter mass)
4.Desulfurization project lime slurry density (concentration) measurement, alarm
5.Denitration project ammonia density (concentration) measurement
6.Pharmaceutical industry concentrated solution density (concentration) measurement
7.Alcohol and water surface density (concentration) measurement
8.Various types of pipeline or tank density (concentration) measurement
Contact US
Xi'an Yunyi Instrument Co., Ltd
E-mail: judy@369yb.com
Phone/WhatsApp:0086 17602903009
Add.: Room B11003, 10th Floor, Sihai Center, No. 424, Taihua North Road, Weiyang District, Xi'an 710021, Shaanxi,China
Product Tags:
|
|
Portable High Applicability Vibration Principle Density Meter Digital Tuning Fork Density Meter Images
|
